GKG GT++ SMT Stencil Printer
Litlhaloso:
GKG Series High Precision Automatic Solder Paste Printer e etselitsoeng ho nepahala ho phahameng
khatiso ea mesh ea tšepe kapa khatiso ea stencil indastering ea SMT.
Boholo ba PCB ea khatiso: 50mm x 50mm ~ 510mm x 510mm;
PCB botenya: 0.4mm ~ 14mm
Botenya ba FPC: ≦0.6mm (ntle le jig)
Lithako tse sebetsang tsa Likarolo
Likarolo tsa SMT tse kang li-resistors, capacitor, inductors, diode le triode: 0201, 0402, 0603, 0805, 1206 le litlhaloso tse ling;
IC: tšehetsa SOP, TSOP, TSSOP, QFN packaging, min.bophahamo ba 0.3 mm;tšehetsa BGA, liphutheloana tsa CSP,
min.bolo 0.2mm;
Mefuta e sebetsang ea PCB
E sebetsa ho mefuta ea PCB ea mohala oa thekeng, puisano, LCD TV, STB, cinema ea lelapa, lisebelisoa tsa elektroniki tsa koloi,
lisebelisoa tsa matla tsa bongaka, sefofane le sefofane, ntle le lihlahisoa tsa elektronike tse akaretsang.
1, Sebopeho se secha sa "stencil X" se secha sa moloko oa 3, eketsa lisebelisoa tsa tšepe tsa solder tse bonolo le tse nepahetseng tsa ho bea;
Beam ea mofuta o mocha oa torque X, rarolla sekhomaretsi sa solder le ho beha lerōle, lelefatsa bophelo ba ts'ebeletso ea mochini;
2, Scalable ho sesebelisoa sa khatello, ka lebaka la deformation e bonolo ea khatiso ea PCB e ka etsa hore letlapa le tsoe, ha ho hlokahale hore u sebelise khatello.
ka nakoana e ka khutla hape.Ho ea ka sehlahiswa tenyetsehang tshebediso
3, Mochini oohle o sebelisa seporo sa tataiso sa ho itlotsa ka ntle ho naha, seporo sa tataiso ha se hloke ho eketsa lubricant, nakong ea lilemo tse hlano tataisa tlhokomelo ea mahala nakong ea lilemo tse hlano.
4, X Y1 Y2 ho US HAYDON linear motor, Japanese precision drive screw, self-lubricating guide train, ho netefatsa ho nepahala.
5, Net foreimi Y ho iphumanela ka bo eona, e ka khona ho lemoha ka potlako counterpoint ea stencil;
6, Beam ea lehare e kobehileng e sebelisa tšepe e matla e phahameng, ts'ebetsong ea khatiso ho netefatsa botsitso ba hlooho ea khatiso;
Sistimi e phaphametseng ea mofuta oa scraper, sesebelisoa se ikhethileng sa ho lula, se ka sireletsa hantle haholo ho scraper drop process stencil le scraper.
| Ntho | Paramethara | |
| Pheta Ho Nepaha ha Boemo | ± 0.01mm (Boitsebiso ba tlhahlobo le mokhoa oa fumaneha) | |
| Ho Nepaha ha Khatiso | ± 0.025mm (Boitsebiso ba tlhahlobo le mokhoa oa fumaneha) | |
| Lebelo la ho Hatisa / Nako ea Cycle | <8s (Ntle le ho hatisa le ho hlwekisa) | |
| Phetoho ea Lihlahisoa | <5Metsotso | |
| Screen Stencil Size / Min-Max | 470mm X370mm-737mm X737mm | |
| Screen Stencil Boholo / Botenya | 20mm ~ 40mm | |
| PCB Size/Min-Max/Thickness | 50X50mm-510X510mm/0.4 ~ 15mm | |
| PCB Warpage Karolelano | ＜1% (Ho ipapisitsoe le bolelele ba diagonal) | |
| Botlaaseng ba Boto ea Boto | 15mm (Tlhahiso e Tloaelehileng), 25mm | |
| Bokhabane ba Boto ea Boto | 3mm | |
| Conveyor Height | 900±40mm | |
| Tataiso ea Conveyor | Le letšehali-Le letona;Le letona-Le letšehali;Le letšehali-Le letšehali;Le letona-Le letona | |
| Lebelo la Conveyor | 100-1500mm/sec Taolo e lokisehang | |
| Boemo ba Boto | Sistimi ea Ts'ehetso | Magnetic pin/Side support block/Pini e iketsang e feto-fetohang (ho ikhethela) |
| Sistimi ea Clamping | Elastic side clamping/Vacuum nozzle/Setaele sa tafole ea tataiso ea mofuta oa Z | |
| Hlooho ea ho hatisa | Lihlooho tse peli tse ikemetseng tsa khatiso tsa Motorized | |
| Lebelo la Squeegee | 6 ~ 300mm / sec | |
| Khatello ea Squeegee | Taolo ea software ea 0-10kg (maikutlo a khatello e koetsoeng), boleng ba khatello bo bonahala | |
| Squeegee Angle | 60°(E Tloaelehileng)/55°/45° | |
| Mofuta oa Squeegee | Squeegee ea tšepe (e tloaelehileng), squeegee ea rabara, le mefuta e meng ea squeegee e tla etsoa ka mokhoa o ikhethileng. | |
| Lebelo la Karohano ea Mesh ea tšepe | 0.1 ~ 20mm/sec Taolo e lokisehang | |
| Mokhoa oa ho hloekisa | Mofuta o omileng, o metsi, mofuta oa vacuum (motsoako o hlophisitsoeng oa mekhoa ea ho hloekisa) | |
| Tafole Phetoho Range | X/Y:±20mm;θ:±2° | |
| Mofuta oa Fiducial Point | Sebopeho se tloaelehileng sa geometry sa ntlha ea fiducial, bonding pad / lesoba la stensele | |
| Sistimi ea khamera | Khamera e le 'ngoe ea dijithale bakeng sa sistimi ea pono e eang holimo / tlase | |
| Khatello ea Moea | 4 ~ 6Kg/cm2 | |
| Tšebeliso ea Moea | Hoo e ka bang 0.07m3 /min | |
| Mokhoa oa ho laola | Taolo ea PC | |
| Phepelo ea motlakase | AC:220±10%,50/60HZ 1Φ 1.5KW | |
| Litekanyo tsa Mochini / Boima ba 'mele | E ipapisitse le mohlala oa eona hantle | |
| Mocheso oa Ts'ebetso | -20°C ~ +45°C | |
| Opereishene Mongobo | 30% ~ 60% | |
